Crestron
SWAMP(I)-24X8
Sonnex Multiroom Audio System
Operations Guide – DOC. 7049E
Sonnex Multiroom Audio System: SWAMP(I)-24X8
•
43
Firmware
Check the Crestron website to find the latest firmware. (New users must register to
obtain access to certain areas of the site, including the FTP site.)
Upgrade SWAMP-24X8 firmware via Crestron Toolbox.
1.
Establish communication with the SWAMP-24X8 as described in
“Establishing Communication” which starts on page 41.
2.
Select
Tools
|
Package Update Tool…
to upgrade the SWAMP-24X8
firmware or double click on an appropriate Package Update File (PUF)
located on the hard drive. The Package Update Tool is loaded as a
standalone application.
Program Checks
Actions that can be performed on the SWAMP-24X8 vary depending on whether it is
connected via Cresnet or Ethernet.
Cresnet Connections
For Cresnet connections, using Crestron Toolbox, display the network device tree
(
Tools | Network Device Tree View
) to show all network devices connected to the
control system. Right-click on the SWAMP-24X8 to display actions that can be
performed on the SWAMP-24X8.
Ethernet Connections
For Ethernet connections, using Crestron Toolbox, display the “System Info”
window (
Tools | System Info
) and select the
Functions
menu to display actions that
can be performed on the SWAMP-24X8.
Be sure to use Crestron Toolbox to create the SWAMP-24X8 IP table.
1.
Select
Functions | IP Table Setup
.
2.
Add, modify or delete entries in the IP table. The SWAMP-24X8 can have
only one IP table entry.
3.
A defined IP table can be saved to a file or sent to the device.
Edit the control system’s IP table to include an entry for the SWAMP-24X8. The
entry should list the SWAMP-24X8’s IP ID (specified on the SWAMP-24X8’s IP
table) and the internal gateway IP address 127.0.0.1.
Summary of Contents for Sonnex SWAMP(I)-24X8
Page 1: ...Crestron SWAMP I 24X8 Sonnex MultiroomAudioSystem Operations Guide ...
Page 4: ......
Page 6: ......
