IR Wireless Touchpanel
Crestron
ST-1700CIR
“ST-1700CIR Device Settings” Window
For more information on setting the IR ID, refer to “Select Interface” on page 8.
NOTE:
The hardware and software settings of the IR
ID must match. The IR
ID
consists of a two-digit hexadecimal number. The touchpanel can be set to one of two
numbers: 00 and 10.
Programming Manager
Programming Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols. The symbol can be viewed by double
clicking on the icon or dragging it into
Detail View
. A description for each signal in
the symbol is described in the SIMPL Windows help file (
F1
).
Programming with VisionTools Pro-e
Touchpanel screens should be created in VisionTools Pro-e to allow switching of
source signals to desired outputs as well as selection of the system mode. There are
no special programming requirements to use the functions of the ST-1700CIR in a
room-control system.
Optional Pushbuttons
Pushbutton Layout and Join
Number Assignment
If the optional ten “hard” pushbuttons are installed, you can use these buttons to
access any frequently used commands (refer to “Appendix: Installation of Optional
Pushbuttons” on page 24). Each button has a permanently fixed digital join number;
refer to the illustration shown to the left. The sequence of digital join numbers is (top
to bottom) 1 through 5 on the left side and 6 through 10 on the right side.
NOTE:
A user may not want the display to come on after a pushbutton is pressed
when the unit is off. The Startup Preference option allows the user to select whether
the touchpanel’s display comes on or stays off after a pushbutton is pressed. For
more information, refer to “Startup Preference” on page 9.
NOTE:
To program a quick pushbutton to flip a page (change a screen) on the
ST-1700CIR, go to the
Hard Keys
tab of the “Project Properties” window in
VT Pro-e. Select a button from the
Button
drop-down list, and then select the desired
page from the
Page Flip
drop-down list. When the button is pressed, the page is
displayed.
The quick pushbuttons can also be programmed to do a page flip via SIMPL
Windows.
14
•
SmarTouch™ IR Wireless Touchpanel: ST-1700CIR
Operations Guide – DOC. 6469
