Crestron RACK2 Operation Manual Download Page 33 | Manualshive

Page: 33 / 52

background image

Crestron

RACK2

2-Series Card Cage System

NOTE:

For more information on console commands, refer to the 2-Series Console

Commands Reference Guide, (latest version of DOC. 6002) available from the
Downloads | Product Manuals section of the Crestron website (www.crestron.com).

Console Commands for Compact Flash

The following commands have been added to enable processing functions for
compact flash files/programs:

CFAUTORUN - Enable the program to autoboot from compact flash.

CFPROJDIRS - Display a list of project directories on compact flash.

CFTRANSFER - Transfer a project to/from compact flash.

MAKEDIR - Create a file directory on compact flash.

REMOVEDIR - Remove a file directory on compact flash.

Console Commands That Work With Compact Flash

The following commands have been modified to enable processing functions for
compact flash files/programs:

CD - Permits changing to a directory on compact flash

DELETE - Enables deleting files from compact flash.

DIR - Permits listing files on compact flash.

FREE - If current directory is on compact flash, gives the amount of space

available on the compact flash. If internal, gives the amount left on
internal flash.

TYPE – Enables display of files residing on compact flash.

XGETFILE – Enables retrieving a file from compact flash.

XPUTFILE – Enables sending a file to compact flash.

Programming

You create a control program for the RACK2 using Crestron programming tools
Crestron Application Builder™ (AppBuilder) and SIMPL Windows. You can begin
programming using the easiest method (Crestron AppBuilder) and use the advanced
techniques available in SIMPL Windows to customize your project. The flexibility
of each of these tools is proportional to the degree of programming expertise (i.e.,
greater flexibility requires more knowledge).

Following are the minimum software requirements for the PC:

•

SIMPL Windows version 2.04.11 or later, with Library Update 225 (also
requires SIMPL+ Cross Compiler).

•

Crestron Database version 15.9.6 or later.

•

(Optional) Crestron VisionTools Pro-e software for designing touchpanel
pages.

•

(Optional) Crestron Application Builder version 1.1.8 software for
automatic residential and commercial programming.

Operation Guide – DOC. 5958

2-Series Card Cage System: RACK2

•

29

«
...
31
32
33
34
35
...
»

Summary of Contents for RACK2





















































Reviews:

No comments

Related manuals for RACK2

Brand: D-Link Pages: 99

Brand: D-Link Pages: 5

Brand: D-Link Pages: 15

AirPro DWL-6000AP

Brand: D-Link Pages: 65

Brand: D-Link Pages: 38

Brand: D-Link Pages: 8

Brand: D-Link Pages: 22

Brand: D-Link Pages: 20

Brand: D-Link Pages: 2

Brand: D-Link Pages: 16

Brand: D-Link Pages: 12

DIR-615 - Wireless N Router

Brand: D-Link Pages: 13

Brand: D-Link Pages: 124

Web Smart DES-1210-28P

Brand: D-Link Pages: 6

2Voice + 4SW VoIP Router DVG-1402S

Brand: D-Link Pages: 57

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 23

Express EtherNetwork DI-604

Brand: D-Link Pages: 7

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 97

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands