Crestron RACK2 Operation Manual Download Page 32 | Manualshive

Page: 32 / 52

Crestron RACK2 Operation Manual Download Page 32

2-Series Card Cage System

Crestron

RACK2

Running Programs From Compact Flash

On power-up or a hardware reset (

HW-R

), the control system first checks for a

program on compact flash and then internal flash. The console command
CFAUTORUN controls the actions of the control system when a compact flash is
inserted into a running system. If CFAUTORUN is enabled, when a compact flash
card is inserted or removed from the system, the system automatically performs a
program reset (

SW-R

) and the boot order described above is used to find the

program to run. If CFAUTORUN is disabled, then the user must either press the

SW-R

button on the front panel or issue a program reset through the Viewport to

switch programs.

Other Compact Flash Related Functions

In addition to the previous topics that are impacted by compact flash availability,
other Viewport command functions-including Erase Program, Erase Web Pages, and
Send Generic Files-permit you to choose between internal flash and compact flash
when selecting programs/files for processing.

A new SIMPL Windows command

File | Copy Output to Compact Flash

copies a

compiled SIMPL Windows program (SPZ) file to a compact flash reader/writer on a
PC. Click

Browse

to locate the SPZ file; select the drive letter of the CF

reader/writer from the drop-down list. Click

OK

to copy the file.

Advanced Console Commands

The SIMPL Windows online help file provides a full listing of console commands
that are valid for

2-Series

control systems. You can access the RACK2 console in a

variety of ways: via a serial connection (RS-232) with a PC, over Ethernet via the
LAN port, or through Telnet, among many other methods. It is also possible to issue
console commands through logic, by adding a Console symbol to the SIMPL
Windows program.

The Console symbol is only visible in the

Symbol Library

when “Special” is selected

as the Symbol Set. Click

Edit | Preferences

. In the

Symbol Set

area of the

General

tab, select

Special

as shown in the following illustration.

"SIMPL Windows Preferences" Window

Console commands are provided for advanced programmers. However, most
functions and commands can be selected from the various Viewport menus.

28

•

2-Series Card Cage System: RACK2

Operations Guide – DOC. 5958

«
...
30
31
32
33
34
...
»

Summary of Contents for RACK2





















































Reviews:

No comments