Crestron
QM-RMC
Room Media Controller
Rear Panel Ports
The QM-RMC rear panel ports are illustrated and described as follows.
INPUT
1 2 3 4 G
INPUT
This connector provides four software programmable digital inputs. Inputs are
Schmidt trigger type (nominal 2.5 V threshold) with 24 V input tolerance. For
detailed information, refer to “Slot 2: C21-DI04” on page 21.
Digital inputs are rated 0 – 24 VDC, 20K ohms input impedance.
IR
S G
IR
A 2-position mini-connector is a mini-implementation of a single PRO2 IR
port. The output is labeled S (signal) and G (ground). Infrared output is rated
up to 1.2 MHz, at data rates up to 9600 baud. Serial protocols include one-
way RS-232. For detailed information, refer to “Slot 1: C2I-IR1” on page 20.
COM B
COM A
COM (A & B)
These two DB9 (male) software programmable, bi-directional serial ports are
available for RS-232 communication, with hardware and software
handshaking and modem control. Speeds are rated up to 115,200 bps.
COM B is used as the console port.
Standard COM DB9 Pinout
PIN DIRECTION
DESCRIPTION
1
TO QM-RMC
(DCD) Data Carrier Detect
2
To QM-RMC
(RXD) Receive Data
3
From QM-RMC
(TXD) Transmit Data
4
From QM-RMC
(DTR) Data Terminal Ready
5
Common
(SG) Signal Ground
7
From QM-RMC
(RTS) Request To Send
8
To QM-RMC
(CTS) Clear To Send
9
To QM-RMC
(RI) Ring Indicator
Memory
The QM-RMC has 36MB of built-in memory (non-volatile and volatile). The
total of 36MB is specified as follows: 4MB flash (non-volatile), 32MB SDRAM
(volatile), and 256KB NVRAM (battery backed up). Flash memory contains the
file system inside the 2-Series control engine. Non-volatile memory contains
information that is retained after the loss of electrical power. Volatile memory is
lost after a power failure. Refer to the following lists for a breakdown of
memory usage for program-related information stored in the unit.
Operations Guide – DOC. 6161
Room Media Processor: QM-RMC
•
7
Summary of Contents for QM-RMC
Page 1: ...Crestron QM RMC Room Media Controller Operations Guide...
Page 4: ......
