Crestron QM-RMC, Operation Manual

Page: 9 / 36

Crestron QM-RMC Room Media Controller
Controls and Indicators
The QM-RMC front panel indicators and controls are described as follows.
QM-RMC
COM A
COM B
IR
INPUT
HW-R SW-R
PWR
ACT
LAN
12VDC
0.5A
COM A
LED indicates COM A port activity.
COM B
LED indicates COM B port activity. Constant blinking indicates that the port is
used for remote console connection.
IR
LED indicates IR port activity.
INPUT
LED indicates input activity.
HW-R
Pressing this button initiates system hardware reset. (Same effect as
disconnecting and reconnecting power.)
SW-R
Pressing this button in combination with the HW-R button performs a system
restart without loading the program (refer to “Troubleshooting
Communications” on page 13). Press HW-R momentarily while pressing and
holding SW-R to reboot.
Pressing SW-R alone while the system is running restarts the program, and puts
the unit at a default IP address. COM B port becomes a remote console
connection.
PWR (Power)
This green LED illuminates when the unit is connected to and receives 12 VDC
power from an external power pack.
ACT (LAN)
This LED illuminates when the QM-RMC communicates with any device on the
network.
Operations Guide – DOC. 6161 Room Media Processor: QM-RMC
•
5