Room Media Controller
Crestron
QM-RMC
Front Panel Ports
The QM-RMC front panel ports are illustrated and described as follows.
LAN
8
1
Yellow
Green
LAN
An 8-position RJ-45 port (labeled
LAN
) is used for connection to the Ethernet,
providing local area network or Web access (cable is not supplied). The port
also contains two light-emitting diodes (LEDs). The green LED on the right
side of the port is a link status LED and illuminates when the card is connected
to a working network. The yellow LED on the left side flashes to indicate
Ethernet activity. Refer to the following table for the Ethernet connector
signals and use an appropriate cable.
LAN 8-Position RJ-45 Connector Specifications
PIN
SIGNALS
1 TD
+
2
TD -
3 RD
+
4
Connected to pin 5
5
Connected to pin 4
6
RD -
7
Connected to pin 8
8
Connected to pin 7
NOTE:
To determine the location of pin 1, hold the cable so that the end of
the eight pin modular jack is facing away from you, with the clip up and
copper side down. Pin 1 is on the far right.
Default Ethernet Ports
80 = Web
41794 = Crestron Com
41795 = Viewport/Debug
12VDC
0.5A
12VDC, 0.5A (Power Supply)
This male connector can be used to supply 12 VDC power to the QM-RMC
from an external power pack (included).
CAUTION:
Use only Crestron power supplies for Crestron equipment.
Failure to do so could cause equipment damage or void the Crestron warranty.
PIN 1
PIN 8
6
•
Room Media Processor: QM-RMC
Operations Guide - DOC. 6161
Summary of Contents for QM-RMC
Page 1: ...Crestron QM RMC Room Media Controller Operations Guide...
Page 4: ......
