Product Manual — Doc. 9324C
IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 40
l
Live Mode: Enabling this option will display a grid view in Wirecast to show all live Camera
Device feeds at once. When a virtual mic is selected with Live Mode enabled, the Primary
and Secondary Camera Devices will point at the location of the Virtual Mic in the room
automatically.
The camera shots will react in real time if the location of a Virtual Mic or Camera Device is
changed. If a PTZ Override is enabled, Live Mode will show the camera shot of the PTZ
Override instead of the automatically generated camera shot. For more information
about Virtual Mics, refer to
Configuring Virtual Mics and Blocking Zones on page 56
NOTE: Live Mode is particularly useful when determining the Virtual Mic positions and
verifying that they are in the correct position, ensuring that the camera shot is appropriately
framed, and checking for obstructions in the camera shot.
l
Proximity Check: Enabling this option will show if Virtual Mics are too close to other Virtual
Mics, or if they are out of range from the Microphone Device. If any of these apply, they
will be indicated in the room layout with a dashed red line. If Virtual Mics do not pass the
Proximity Check, then the Microphone Device may struggle to pinpoint that Virtual Mic
location.
Virtual Mic Proximity Check
