Product Manual — Doc. 9324C
IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 30
Alternately, if a project has been already created and needs to be imported into the system,
select the Choose File button under the Upload Project banner. This will open a file explorer
window. Navigate to the desired room designer project and select it (this will be a .1brd file). The
project will be imported in its entirety with all of the formatting previously created.
NOTE: If a room designer project was created on an device other than the Automate VX
system, place the project into a file directory on the Automate VX system before attempting
to upload the project. The most common application of this is when a project is created on
the
and needs to be imported to the Automate VX system.
Upload Project
Upload Project File Explorer Window
