Crestron IDOC-PAD-DSWC Operations & Installation Manual Download Page 2

 

 

This document was prepared and written by the Technical Documentation department at: 

 

 

Crestron Electronics, Inc. 

15 Volvo Drive 

Rockleigh, NJ 07647 

1-888-CRESTRON 

 
 
 

Regulatory Compliance

Federal Communications Commission (FCC) Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Industry Canada (IC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

CAUTION:

Changes or modifications not expressly approved by the manufacturer responsible for compliance 

could void the user’s authority to operate the equipment. 

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

As of the date of manufacture, the IDOC-PAD-DSWC and IDOC-PAD2-DSWC have been tested and found to 
comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance 
Labelling.

 
 
 

Crestron, the Crestron logo, and Crestron Mobile Pro G are trademarks or registered trademarks of Crestron Electronics, Inc. in 

the United States and other countries. Apple and iPad are either trademarks or registered trademarks of Apple, Inc. in the United 

States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities 

claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. 

©2011 Crestron Electronics, Inc. 

 

 

Summary of Contents for IDOC-PAD-DSWC





















Reviews: