Product Manual — Doc. 7389C
GL-IPAC-SW8 • 28
4. Press Mode to assign an action to the load:
l
On/Off turns the load on and off based upon occupancy or vacancy.
l
Off Only turns the load off based upon vacancy.
l
Auto/Off allows the sensor to detect occupancy and then checks the ambient light
levels to determine if the lights should be turned on. When vacancy is detected,
lights turn completely off.
The Sensor Load Assignment screen (above) shows two different sensors assigned
to two different loads. They function as follows:
l
Sensor 2 turns load 1 on panel 1 off.
l
Sensor 3 turns load 2 on panel 1 on or off depending on occupancy or vacancy state.
Assign an Occupancy Sensor to a Group
Multi allows multiple occupancy sensors to be grouped, enabling them to monitor large areas.
When one occupancy sensor detects motion, the area is assumed to be occupied. All connected
occupancy sensors in a group must go vacant for the vacancy action to trigger.
To assign an occupancy sensor to a group:
1. From the Sensor Load Assignment Screen, press Multi to enter the Occ Multi screen.
Groups 1 through 10 are displayed. The first digit in parenthesis indicates how many
sensors are assigned to each group. If no sensor has been assigned to the group, 0 is
displayed inside the parenthesis.
2. Use ▼ and ▲ to select the sensor group and select Edit.
3. Use ▼ and ▲ to highlight the occupancy sensor and then Enter to select it.
4. Press Set to add the sensor to the group. The number of sensors in the group is indicated
within the parenthesis.
5. Press OK to save the assignments and return to the Sensor Load Assignment menu.
Occ Multi Screen
