Crestron
e-control Mail SW-MAIL
77
••
Appendices
Installation & Reference Guide — Doc. 5798
EchoRcptAddr
Applies to
e-Mailer signal blocks
Description
String sent as feedback in response to setting a new recipient address
Direction
Server-to-system
Type
Serial
Value
New recipient address
Expected Reply
None
Comments
Definition of this signal is optional.
This signal is generated in response to lookups only. Signals that might precipitate
this are
LookupRcpt, LookupMsg, ClearNames, NewMail,
and manually picking
an item from a bound data scroller. Specifically excluded are
Shortcut
signals, and
the
SetSubj
signal.
Echoing the recipient address does not necessarily imply that the address has
already been added to the recipient list because default addresses are also
echoed.
Serial data is limited to 83 characters. If the recipient address exceeds this length,
the transmitted string is truncated.
For efficiency, strings are only echoed when they change (e
.g.,
if two lookups both
produced the same result, the string would only be echoed the first time).
See Also
For more information on how default addresses are resolved, refer to “Implicit
Recipient Name & Address” on page 47.
