Crestron DVPHD Operation Manual Download Page 73

Page: 73 / 94

Crestron

DVPHD

High Definition Digital Video Processor

“SELECT EXTERNAL TOUCH INPUT” Screen

SELECT EXTERNAL TOUCH INPUT

SMART
ELO

ENTER

FRONT PANEL PASSWORD

The “FRONT PANEL PASSWORD” screen is used to delete or enable a front panel
password. If a valid password is saved, the front panel is locked until the correct
password has been entered. If an empty string is saved, the password is disabled.

Press

to increase or decrease the underscored digit. Press

(

DEL

) to

move the cursor back one step and delete the digit. Press

(

ENTER

) to move the

cursor forward one step. Press

(

SAVE

) to confirm the password and return to the

previous menu. Press

(

CANCEL

) or

(

MENU

) to return to the previous menu

without change.

NOTE:

A password must be four digits only. Passwords with less or more than four

digits are ignored.

“FRONT PANEL PASSWORD” Screen

FRONT PANEL PASSWORD :
    Current : 1234
   New : 12
CANCEL DEL     SAVE

ENTER

Operations Guide – DOC. 6545C

High Definition Digital Video Processor: DVPHD

•

Summary of Contents for DVPHD































































































Search results

Summary of Contents for DVPHD

Reviews:

Crestron DVPHD, Operation Manual, Page: 73 / 94

Search results

Summary of Contents for DVPHD

Reviews: