Crestron
DVPHD
High Definition Digital Video Processor
“Video 2 Setup” Details – RGB Color and RGB Size and Position (Continued)
VIDEO 2 SETUP
SCREEN
CONTROLS
DESCRIPTION
Color Control
When
RGB Color
is selected as the video type, these
controls are available. The
Restore Default Color
Settings
button places the controls at their midpoint.
Brightness
1, 2
Adjusts video image brightness with the
–
and
+
buttons.
Contrast
1, 2
Adjusts video image contrast with the
–
and
+
buttons.
Red
1, 2
Adjusts the amount of red in the video signal with the
–
and
+
buttons.
Green
1, 2
Adjusts the amount of green in the video signal with the
–
and
+
buttons.
Blue
1, 2
Adjusts the amount of blue in the video signal with the
–
and
+
buttons.
Detail
Enhancement
Adjusts video image sharpness with the
–
and
+
buttons.
Noise Reduction
Adjusts the amount of video image noise reduction with
the
–
and
+
buttons.
Noise Threshold
Adjusts the threshold of video image noise with the
–
and
+
buttons.
Overscan
These controls adjust the amount of video information at
the edges of the image. This part of the video picture is
usually beyond the display capabilities of the screen.
None
Sets the video screen so there is 0% overscan. The
amount of used screen area is smallest in this
configuration. This must be set for PC sources.
Normal
Sets the video screen for 3% overscan (default). This
results in more area of the screen being used.
Max
This sets the video screen for 5% overscan. This results in
some loss of information at the screen edges.
(Continued on following page)
Operations Guide – DOC. 6545C
High Definition Digital Video Processor: DVPHD
•
35