Crestron DVPHD Operation Manual Download Page 58

Page: 58 / 94

High Definition Digital Video Processor

Crestron

DVPHD

Default Screen

The Default screen is displayed when the DVPHD has booted up, if the unit has not
been locked or password protected.

DEFAULT Screen (DVPHD Unlocked)

HD Digital Video Processor 01:03:06AM
01/01/00

INPUT 1: YPrPb 720p
INPUT 2: DVI 1600x1200 60Hz

ENTER

The device, firmware version, date and time are listed across the top of the screen.
Each input and the type of video detected is listed beneath. To scroll through the list
of inputs press

and/or

If the front panel is locked, the following screen is displayed.

NOTE:

To set the front panel password, proceed as described in “

Error! Reference

source not found.

” on page

Error! Bookmark not defined.

Default Screen (DVPHD Locked)

HD Digital Video Processor 01:03:06AM
01/01/00

FRONT PANEL LOCKED

ENTER

To unlock the front panel, press the

ENTER

button (

). The “UNLOCK CODE”

screen is displayed.

“UNLOCK CODE” Screen

UNLOCK CODE :

1 2 3 4 5 6

ENTER

•

High Definition Digital Video Processor: DVPHD

Operations Guide – DOC. 6545C

Summary of Contents for DVPHD































































































Search results

Summary of Contents for DVPHD

Reviews:

Crestron DVPHD, Operation Manual, Page: 58 / 94

Search results

Summary of Contents for DVPHD

Reviews: