manualshive.com logo in svg

Crestron DVPHD, Operation Manual, Page: 55 / 94

Share
Download
Crestron DVPHD Operation Manual Download Page 55

Crestron 

DVPHD

 

 

High Definition Digital Video Processor

 

Cresnet ID of the DVPHD and the address book entry of the control system 
that is connected to the DVPHD. 

3.  Display the DVPHD’s “System Info” window (click the 

 icon); 

communications are confirmed when the device information is displayed. 

USB Communication 

USB Communication 

USB

PC Running

Crestron Toolbox

DVPHD

 

The 

COMPUTER

 port on the DVPHD connects to the USB port on the PC via the 

included Type A to Type B USB cable. 

1.  Use the Address Book in Crestron Toolbox to create an entry using the 

expected communication protocol (USB). When multiple USB devices are 
connected, identify the DVPHD by entering “DVPHD” in the 

Model 

text 

box, the unit’s serial number in the 

Serial 

text box or the unit’s hostname in 

the 

Hostname 

text box. The hostname can be found in the “System Info” 

window in the section marked 

Ethernet 

however, communications must be 

established in order to see this information in the “System Info” window. 

2.  Display the DVPHD’s “System Info” window (click the 

 icon); 

communications are confirmed when the device information is displayed. 

TCP/IP 

Ethernet Communication 

PC Running

Crestron Toolbox

LAN

DVPHD

 

The DVPHD connects to PC via Ethernet: 

1.  Establish serial communication between DVPHD and PC. 

2.  Confirm Ethernet connection between DVPHD and PC. If connecting 

through a hub or router, use CAT5 straight through cables with 8-pin RJ-45 
connectors. Alternatively, use a CAT5 crossover cable to connect the two 

LAN

 ports directly without using a hub or router. 

3.  Use the Device Discovery Tool in Crestron Toolbox to detect all Ethernet 

devices on the network and their IP configuration. The tool is available in 
Toolbox version 1.15.143 or later. 

4.  Use the Address Book in the Crestron Toolbox to create an entry for the 

DVPHD with the DVPHD’s TCP/IP communication parameters. 

5.  Display the “System Info” window (click the 

 icon) and select the 

DVPHD entry from the Address Book or the Address Book drop-down 
menu. 

 

Operations Guide – DOC. 6545C 

High Definition Digital Video Processor: DVPHD  

•

  51 

Summary of Contents for DVPHD































































































Reviews:

No comments