4 • DM-NVX-E760 and DM-NVX-E760C
Product Manual — Doc. 8918B
Rear Panel
The following illustration shows the rear panel of the DM-NVX-E760.
DM-NVX-E760 Rear Panel
Ê
PWR: (1) LED, indicates operating power supplied via PoE++, UPOE, or the included
power pack; illuminates amber while booting and green when operating
Ë
SETUP: (1) Red LED and (1) push button for on-screen IP address display
NOTES:
l
If the DM-NVX-E760 encoder is connected to a DM-NVX-D30(C), DM-NVX-D80-
IOAV, or DM-NVX-36x(C) decoder, pressing the SETUP button on the DM-NVX-
E760 for less than 10 seconds displays the encoder and decoder IP addresses on
the display connected to the decoder.
l
If the DM-NVX-E760 encoder is connected to a DM-NVX-35x(C) decoder,
pressing the SETUP button on the DM-NVX-E760 for less than 10 seconds
displays the IP address of the decoder on the display connected to the decoder.
Ì
RESET: (1) Recessed push button for hardware reset
Í
24VDC 2.5A: (1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
power pack (included)
Î
G: 6-32 screw;
Chassis ground lug
