30 • DM-NVX-E760 and DM-NVX-E760C
Product Manual — Doc. 8918B
DM Input
The DM INPUT port on the DM-NVX-E760 and DM-NVX-E760C enables an AV signal from a DM
8G+® output device or DM Lite® transmitter to be transmitted over the network to one or more
DM NVX decoders. The DM INPUT port can be connected to the DM 8G+ output of a DM
switcher, transmitter, or other DM device. Examples of DM 8G+ output devices are the DMC-
4KZ-CO-HD card and DMB-4K-O-C blade of DM switchers, the DM-TX-4KZ-100-C-1G
transmitter, and the DMPS3-4K-350-C and DMPS3-4K-250-C presentation systems.
The DM INPUT port can also be connected to the DM Lite port of a DM Lite transmitter.
Examples of DM Lite transmitters are the HD-TX-101-C-E and the HD-TX-101-C-1G-E.
To configure the DM INPUT port, use the web interface or SIMPL Windows.
Using the Web Interface
Configure the DM INPUT port by clicking the Settings tab and then clicking Inputs. The Inputs
table is displayed, showing the current status of the input.
To configure the input:
1. In the Actions column, click Edit. The Edit Input pop-up page opens.
2. In the General section of the page:
a. In the Name text box, enter a name for the input.
b. In the HDCP Receiver Capability drop-down list, select Auto (automatic, default
setting), Disabled, HDCP 1.4, or HDCP 2.2.
c. In the DM Input Type drop-down list, select the device type to be connected to the
DM INPUT port: DM Transmitter, DM Lite Transmitter, or DM Output Card/DMPS.
3. In the EDID (Extended Display Identification Data) section of the page, select the desired
EDID from the Select drop-down list and then click Apply EDID.
4. Click OK in the lower-right corner of the pop-up page.
