22 • DM-NVX-E760 and DM-NVX-E760C
Product Manual — Doc. 8918B
Differentiated Services Code Point
(DSCP)
To implement Quality of Service (QoS), IP networks use the DSCP value. Within an IP packet
header, the DSCP defines a value from 0 to 63 that maps to a certain traffic classification.
Based on IT department policies, DSCP values are used within a network to determine the
treatment of packets in router queues, the routes of traffic flows, and per-hop behavior. By
default, DSCP is set to 32.
NOTE:
Change the DSCP default setting of 32 only if required by IT department policies.
Configure DSCP by clicking the Settings tab and then clicking Stream. In the Advanced section,
set a DSCP value:
1. Disable Auto Initiation by setting the Auto Initiation toggle switch in the Off (left) position.
2. Stop the stream by clicking Stop.
3. Enable Custom DSCP by setting the Custom DSCP toggle switch in the On (right)
position.
4. In the DSCP text box, enter the desired DSCP value (0 to 63).
5. Enable Auto Initiation by setting the Auto Initiation toggle switch in the On (right)
position. The stream automatically restarts.
NOTE:
Disabling DSCP returns the DSCP value to the default setting.
