Docking Assembly for STX-1700CW/CXPW
Crestron
DA-1700CW
Specifications
The table below provides a summary of specifications for the DA-1700CW.
Specifications of the DA-1700CW
SPECIFICATION
DETAILS
Cresnet Power Usage
16 Watts (0.67 Amps @ 24 VDC)
1
Default Network ID
51
Control System Update Files
2,3,4
2-Series Control System
Version C2-2004.CUZ or later
CEN/CN-TVAV
Version 5.10.13V.UPZ or later
CNMSX-AV/PRO
Version 5.10.11X.UPZ or later
CNRACKX/-DP
Version 5.10.11W.UPZ or later
ST-CP
Version 4.02.02-S.UPZ or later
Dimensions and Weight
Height: 6.51 in (16.54 cm)
Width: 5.57 in (14.14 cm)
Depth: 3.56 in (9.05 cm)
Weight: 3.21 lb (1.46 kg)
1.
Value shown is for docking station with no touchpanel docked. With docked touchpanel, power usage
is 34 watts (1.42 Amps @ 24 VDC).
2.
The latest versions can be obtained from the Crestron website. Refer to NOTE below.
3.
Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
4.
Filenames for CNX and ST-CP update files have a UPZ extension. Files on the website may be .zip or
self-extracting .exe files containing the .cuz or .upz file. All can be obtained from the Downloads
section of the Crestron website. To avoid program problems, make sure you are using the update file
with the correct suffix letter (e.g., S, V, W, X)
NOTE
: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
Refer to the illustrations on the next two pages. The physical view illustrates the
docking assembly mounted in a back box. The dimensions diagram provides overall
height, width, and depth dimensions of the DA-1700CW. The front view of the
DA-
1700CW shows the two mechanical hooks used to latch the touchpanel and six
electrical contacts. The upper two electrical contacts are for Cresnet system Y and Z
data signals and the remaining four contacts supply touchpanel operating power and
ST-BTPN recharging. The side view diagram shows the manual unlatch tab
(accessible through the supplied decorative faceplate), the latching lever and hooks,
and the electrical unlatch solenoid. At the rear of the DA-1700CW is the standard
Cresnet 4-wire, network port. The port provides the Cresnet 24 volts direct current
(VDC) operating power, communications, and ST-BTPN recharging power to the
DA-1700CW.
Supplied with the DA-1700CW, but not shown, are a decorative front panel, manual
unlatch access hole plug (part number 2002405) and four hex screws (part number
2007227). Four Phillips screws (2007217) to secure the unit to the BB-1700CW back
box are also supplied.
2
•
Docking Assembly for STX-1700CW/CXPW: DA-1700CW
Operations and Installation Guide - DOC. 6104A
