CRESTRON
12
••
Series 3500 Touchpanels
Operations Guide - DOC. 8108B
Diagnostics Menu
The DIAGNOSTICS button from the Main Menu should only be used under
supervision from a CRESTRON technical support representative during telephone
support. The options available from the Diagnostics Menu, shown below, are
numeric in nature and their interpretation is beyond the scope of this manual.
Diagnostics Menu (ColorTouch [left] & VideoTouch [right] Configurations)
Setup Menu
To obtain the Setup Menu, shown below, select and hold the SETUP button from
the Main Menu until the Setup Menu is displayed. Many options for setting
parameters of the touchpanel are available from the Setup Menu and are explained
in the following paragraphs. After setup parameters have been set, select the Return
button, located at the lower right corner of the Setup Menu.
Setup Menu
Brightness
Screen brightness may need to be altered because of ambient light conditions or
personal preference. Three brightness buttons, Brightness Low, Brightness Medium,
and Brightness High, located in the bottom row of the Setup Menu may be selected
to assign brightness setting. Current brightness setting is shown in red rather than
black text.
Composite Versus S-Video (VideoTouch configurations only)
Composite video mode uses a single video signal for luminance and chrominance.
S-Video mode uses separate signals for luminance and chrominance which results
in superior resolution and color fidelity. If selected, the text color of this button is
shown as red rather than black.
Fast Motion Versus Still Video (VideoTouch configurations only)
Fast motion mode reduces motion artifacts and should be used for most video
sources. Still video mode works best for still pictures. It has a maximum resolution