Crestron 4 Series Product Manual Download Page 30

Page: 30 / 74

Product Manual — Doc. 9094B

ZUM-HUB4 • 25

System View

The System View lists Floors and rooms (in the Rooms tab) that are discovered by the
ZUM-HUB4. Use the Hardware Management tab to view and edit device information, such as
assigning a device to a floor.

Manage Floors (on page 49)

Set the Bluetooth PIN for a Floor (on page 32)

Set the Demand Response Level for a Floor (on page 36)

Manage Devices (on page 50)

Settings View

The Settings View manages the settings for the ZUM-HUB4, Users, External Control, and
Commissioning. The Settings tab is open by default.

Manage Settings (on page 54)

Manage Users (on page 58)

Manage External Controls (on page 60)

Manage Commissioning (on page 63)

Global Settings and Actions for the ZUM-HUB4

Apply settings that effect all devices discovered by the ZUM-HUB4 regardless of the room, room
category, or floor the device is assigned.

ZUM-HUB4 actions:

Configure Demand Response Mode (on page 33)

Discover Rooms (on page 27)

Reboot ZUM-HUB4 (on page 67)

ZUM-HUB4 controls:

Add a Room Category

Turn On/Off All Discovered Devices (on page 29)

Set the Bluetooth PIN for All Discovered Devices (on page 30)

Set the Demand Response Level for All Discovered Devices (on page 34)

Summary of Contents for 4 Series











































































Search results

Summary of Contents for 4 Series

Reviews:

Related manuals for 4 Series

Brands by name

Popular brands

Crestron 4 Series, Product Manual

Search results

Summary of Contents for 4 Series

Reviews:

Related manuals for 4 Series

Brands by name

Popular brands