Product Manual — Doc. 9094B
ZUM-HUB4 • 49
Configure Holidays
After adding a Holiday, the Holiday Settings window opens. Alternatively, clicking
beside a
Holiday opens the Edit Holiday Settings window. These windows display the Holiday settings. To
configure Holidays in the Holiday Settings window:
1. Enter or edit the name of the desired Holiday in the Holiday field.
2. Configure the Properties:
l
Day Pattern: By default, the Holiday Day Pattern is selected
l
Enabled: By default, the Enabled toggle is on. Turn the toggle off to prevent the
holiday from appearing in the calendar on the Schedule tab. When the toggle is off,
the default Day Pattern is applied instead.
l
Observed: Select a date to observe the holiday.
3. Click Add to add the Holiday or Cancel to close the window.
Manage Floors
Rooms must be discovered by the ZUM-HUB4 before performing any procedure in this section.
Refer to
. Access Floors in the System View. To manage a Floor,
refer to the following information:
l
Turn On/Off a Floor (on page 29)
l
Set the Bluetooth PIN for a Floor (on page 32)
l
Set the Demand Response Level for a Floor (on page 36)
l
l
