Crestron 2 Series Operation Manual Download Page 60

Page: 60 / 64

2-Series Integrated Dual Bus Control System

Crestron

AV2 & PRO2

WEBPORT

Description:

This command specifies the port number from which the web server listens. Changing the port (from the well
know web server port 80) can protect the system from attacks.

Help Menu(s):

Ethernet

Syntax:

WEBPORT [portnumber]

Parameters:

portnumber - port number for CIP activity

Possible Source: RS-232, CTP, Telnet

XGETFILE

Description:

This command uses Xmodem to retrieve a file(s) from the panel. Wildcards are accepted and can be in the
form of (*file, *file*, and file*).

Help Menu(s):

File, Main

Syntax:

XGETfile filespec

Parameters:

filespec - ASCII string contains the file name and/or wildcards

Possible Source: RS-232, CTP

XONXOFF

Description:

This command enables/disables the software handshaking on the RS-232 port. If no parameter is entered, the
current state is displayed.

Help Menu(s):

System

Syntax:

XONxoff [ON | OFF]

Parameters:

ON - enables the XON/XOFF handshaking
OFF - disables the XON/XOFF handshaking

Possible Source: RS-232, CTP, Telnet

XPUTFILE

Description:

This command uses Xmodem to send a file to a touchpanel. All information is retrieved from the file.

Help Menu(s):

File, Main

Syntax:

XPUTfile

Parameters:

none

Possible Source: RS-232, CTP

•

Integrated Dual Bus Control System: PRO2 & AV2

Operations Guide - DOC. 5957

Summary of Contents for 2 Series

































































Search results

Summary of Contents for 2 Series

Reviews:

Related manuals for 2 Series

Brands by name

Popular brands

Crestron 2 Series, Operation Manual

Search results

Summary of Contents for 2 Series

Reviews:

Related manuals for 2 Series

Brands by name

Popular brands