Crestron
AV2 & PRO2
2-Series Integrated Dual Bus Control System
years. In the event that the clock fails, only an authorized technician should replace
it. Refer to caution statement below.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
Serial Communication Difficulties with Other
Devices Connected to the Control System
Passthrough Mode
Passthrough mode is accessed from the Crestron Viewport by selecting
Functions|Enter Passthrough Mode (CNX / 2-Series only)
. The window, shown
after this paragraph, is used to select the port configuration for passthrough mode.
Passthrough Mode Window
Passthrough mode allows data to pass from the COMPUTER port to the selected
COM port on a Cresnet or Ethernet device (such as ST-COM or CEN-COM). While
passthrough mode is running, the program currently in memory is suspended and
will not execute. When passthrough mode is exited, the program resumes operation.
The TX and RX LEDs for the given port illuminate when in passthrough mode.
Entering passthrough mode for one of the internal COM ports reinitializes it, which
clears the data for that port. The COM analyzer also functions while the unit is in
passthrough mode.
COM Analyzer
NOTE:
Only COM-type devices and cards in the SIMPL Windows program that are
active (not commented out) are monitored.
Depressing the COM menu function button from the front panel Main Menu (default
front panel page) displays a listing of all devices and cards that can be monitored.
Operations Guide - DOC. 5957
Integrated Dual Bus Control System: PRO2 & AV2
•
41
Summary of Contents for 2 Series
Page 1: ......
