2-Series Integrated Dual Bus Control System
Crestron
AV2 & PRO2
RTSCTS
Description:
This command enables/disables the hardware handshaking on the RS-232 port. If no parameter is entered, the
current state is displayed.
Help Menu(s):
System
Syntax:
RTScts [ON | OFF]
Parameters:
ON - enables the RTS/CTS handshaking
OFF - disables the RTS/CTS handshaking
Possible Source: RS-232, CTP, Telnet
SAVE
Description:
This command forces a system parameter save to EEPROM.
Help Menu(s):
Main, System
Syntax:
SAVE
Parameters:
none
Possible Source: RS-232, CTP, Telnet
SELFTEST
Description:
This command executes the system self test procedure.
Help Menu(s):
Device
Syntax:
SELFTEST
Parameters:
none
Possible Source: RS-232, CTP, Telnet
SERIAL
Description:
This command sets the communication parameters for the
COMPUTER
port. New settings are effective
immediately.
Help Menu(s):
System
Syntax:
SERial baud,parity,databits,stopbits
Parameters:
baud - desired baud rate for the RS-232 port (110 through 115200)
parity - desired parity for the port ('N', 'E', 'O')
databits - desired number of data bits (7,8)
stopbits - desired number of stop bits (1,2)
Possible Source: RS-232, CTP, Telnet
SHOWHW
Description:
This command displays the current hardware configuration as well as the current Internet settings.
Help Menu(s):
Main, System
Syntax:
SHOWHW
Parameters:
none
Possible Source: RS-232, CTP, Telnet
SYSTEM
Description:
This command initiates a firmware upgrade using Xmodem to transfer the new firmware to the panel. The user
is prompted to start the Xmodem transfer (not allowed over a Telnet connection).
Help Menu(s):
File, System
Syntax:
SYSTEM
Parameters:
none
Possible Source: RS-232, CTP
54
•
Integrated Dual Bus Control System: PRO2 & AV2
Operations Guide - DOC. 5957
Summary of Contents for 2 Series
Page 1: ......
