Crest Healthcare Pro R:1
b.
c.
Properly dispose of empty detergent bottle.
Position new detergent bottle, remove and discard shipping
cap.
Install detergent injector suction tube assembly into detergent
bottle.
d.
NOTE: Crest recommends Crest chemistries.
Check Instrument Lubrication supply. If lubricant needs to be
changed, proceed as follows:
4.
NOTE: Crest recommends ChemCrest chemistries (see
S
ECTION
5.2, S
PECIAL
A
DDITIVES
S
PECIFICATIONS
).
a.
b.
c.
Remove lubricant injector suction tube from empty bottle.
Properly dispose of empty lubricant bottle.
Position new lubricant bottle, remove and discard shipping
cap.
Install lubricant injector suction tube assembly into instrument
lubrication bottle.
d.
5.
6.
Turn Generator Power Switch to ON (see
Figure 5-4
).
Ensure access doors are completely closed. Access doors are
equipped with a safety interlock switch and power is interrupted to
P
J
Ultrasonic System if door is open or removed.
Push
MAIN POWER ON/OFF
pushbutton to turn system ON (see
Figure 5-2
).
Cycle 1, 2, 4 and 6 settings are factory preset (see
S
ECTION
5.3.4,
C
HANGING
C
YCLE
P
ARAMETERS
).
Press
WASH LID OPEN
touch pad on screen to raise tray
elevator(s) and open lid(s). Carefully remove any objects or debris
from chamber(s).
7.
8.
9.
NOTE: For Cleaning System Cycle operation, note the following:
1) If Operator is running Cycles 4/5 and then chooses Cycle 1/2/3,
Cleaning System automatically runs Cycle 6 flush and drain
(unless REMAINING WASH STEP is at 0 and system has power
drained). Lid opens at Cycle 6 completion and Operator must
reselect Cycle 1/2/3.
2) If Operator is running Cycles 1/2/3 and then chooses Cycle 4/5,
Cleaning System drains chamber and Cycle 4/5 begins.
3) If Operator is running Cycles 4/5 and Cleaning System reaches
Cycle count, if Operator selects another Cycle 4/5, Cleaning
System drains chamber between Cycle selections.
5-12
Operator Manual
Supplemental Information
WARNING – PINCHING
HAZARD: Pinch point is
created during lid articulation.
Keep hands clear when
opening or closing the lid
.