Cressi NEPTO, Instruction Manual

Page: 27 / 36

ENGLISH
27
POWER SAVER MODE (SLEEP)
Cressi NEPTO offers a power saver mode that's helpful for example when you're
not using the watch for long periods.
In this mode the display and the pressure sensor are disabled, significantly ex-
tending the life of the battery.
To enable power saver mode, from the SLEEP screen, press UP /DOWN .
The word NO will flash on the display, with SURE? below it.
Press UP /DOWN to move from NO to YES and then immediately long-
press
SEL
for five seconds:
A countdown from five will begin. When it reaches zero the display will turn off.
To exit SLEEP mode, simply press one of the two buttons briefly.
NOTE :
Cressi NEPTO keeps time in SLEEP mode.
WARNING :
Do not begin a freedive session when NEPTO is
set to SLEEP mode.
SLEEP MODE
SEL ESC
SWITCH TO YES
AND PRESS
TO PUT THE WATCH INTO SLEEP
MODE OR TO RETURN
SEL
ESC
Sleep mode saves battery power when you're
not using the watch.
Exit this mode before
entering the water.