background image

ENGLISH

15

 

Warm-up dives (BLOODSH)

This function is useful when you want to take a dive to a certain depth in order to 
reduce the risk of pulmonary edema.
Many researchers suggest that at the root of freediving hemoptysis is an increase 
in pressure in the pulmonary capillaries.
A series of gradual dives, beginning at shallow depths, appears to be an excellent 
method for decreasing the onset of this neurological condition.
The depth that can be set varies from 30m (98 ft) to 120m (393 ft) in increments 
of 5 m (16 ft). The watch factory setting is OFF.
As an example, if the function is set to 50 m (164 ft), the watch will display the 
BLOODSHIFT icon, while at the same time showing a series of three warm-up 
dives.
the first (1° BLOODSHIFT) to -5m (-16 ft)
the second (2° BLOODSHIFT) to -10m (-33 ft)
the third (3° BLOODSHIFT) to -25m (82 ft) (half of the depth set).

Press 

SEL       

 to enter the function, then UP   /DOWN    to set the desired depth, 

and finally  

SEL       

 to confirm.

Press 

ESC

 to exit the function.

SEL

ESC

SEL

ESC

1° DIP

2° DIP

3° DIP

SET

ACTIVITY

Summary of Contents for NEPTO





































Reviews: