Cressi NEPTO, Instruction Manual

Page: 29 / 36

ENGLISH
29
SURFACE/POSTDIVE
When you return to the surface, the watch will enter surface time.
Surface mode offers five pages you can view by pressing
UP /DOWN .
The main page shows:
• maximum depth of the previous dip
• dive time of the previous dip
• surface time in minutes and seconds
• total number of dips taken in the current session
• current temperature
The second page shows:
• total session time (surface time + dive time)
• deepest depth logged during the session
• number of dips taken in the current session
• coldest temperature logged during the session
The third page shows:
• the ratio of dive time to surface time
• the current time
On the fourth page (LOG)
you can press
SEL
and then UP /DOWN to
consult the data on dips taken in the session.
Press
ESC
to exit the SURFACE/LOG function.
The fifth page (SET)
offers a DIVE SET menu for the session in which you can
set the following alarms: surface time warning (SURF-T), depth alarms (DEPTH
AL1, AL2, AL3, AL4, AL5), dive time warning (DIVE-T), and depth interval alarm
(STEP).
Refer to the DIVE-SET section for these settings.
To exit the freedive section:
Press
ESC
to view the exit screen.
Then press UP /DOWN until the screen reads YES and confirm,
pressing
SEL
NOTE :
After an hour of surface time the session will be closed automatically.
NOTE :
The NO FLY icon will be displayed for the next 24 hours. While this is
shown, air travel and travel to high altitude must be avoided.
SURFACE
MAX DEPTH
LAST DIP
SURF
TIME
RECOVERY
TIME
DIVE TIME
END SESSION?
Scroll YES/NO
and confirm
SEL