Cutter’s Mate
Owner’s Manual
6 van 14
Cuttersmate-europe 2012 Rev. 1
IMPORTANT:
The manufacturer has preset the arm for use on a table or bench top. If you are planning to
use the Cutter’s Mate with the Beetle Bit Waffle Grid or the Morton Grid, you will need to use the grid
adapters. It is important for the arm to be parallel to the bench top so that the cutting wheel will remain at
a constant 90-degree angle to the glass surface. (See Adjusting Cutter’s Mate, but please note that the grid
adapters automatically compensate for the change between any flat surface and Beetle Bit Waffle Grid or
the Morton Grid.)