Cutter’s Mate
Owner’s Manual
5 van 14
Cuttersmate-europe 2012 Rev. 1
Unpack and Install
1. Carefully remove the two plastic-wrapped components from the box
2. Cut the sealed plastic bags open and remove the components. Take care if using a sharp knife or scissors
to open the bags.
3. Dispose of the plastic bags properly. These can be dangerous to small children or pets.
NOTE:
You can retain the box to transport your Cutter’s Mate.
Meet Your Cutter’s Mate
As you examine your Cutter’s Mate for the first time, take a little time to get to know it. The components of
Cutter’s Mate are precision-manufactured for smooth movement in all directions. The handle is large and
cushioned for comfort and control. The arm may seem heavy, but when attached to the base, you will find
it to be perfectly balanced and weighted. You simply have to try your new Cutter’s Mate to believe it.
Part names used throughout these instructions are similar on all three models. The following diagram
illustrates the parts you will need to be aware of while reading this manual. You may need to refer back to
the illustration for clarification.
