Installing Your Multimedia Kit 10
8.
When the destination path is
correct, choose
Next
. The
installation program copies the
files to your computer. The Device
Selection dialog appears.
9.
Select the device that you have
connected to the CD-ROM drive.
❒
Choose “IDE Hard Disk
Controller Card” if you have
daisy-chained the CD-ROM
drive to the primary port on
your motherboard.
❒
Choose “Onboard IDE
Secondary Port” if the CD-ROM drive is connected to an available secondary IDE port on
your motherboard.
❒
Choose “Plug and Play Card” if you attached the drive to a Plug and Play interface card.
❒
Choose “Non-Plug and Play Card” if the drive is connected to a non-Plug and Play
interface card.
10. The Setup Complete dialog
appears.
11. Choose
Finish
to restart your
computer.