Installing Your Multimedia Kit 8
Installing the
CD-ROM Software
The Creative CD-ROM Installation Disk contains drivers necessary to operate your CD-ROM drive. The
software installation varies according to your computer’s operating system. The following installation
software is provided:
❒
Windows 95/98 (page 8)
❒
Windows NT (page 11)
Please refer to the section regarding your specific operating system for complete installation instructions.
Windows 95/98
The CD-ROM drive functions in Windows 95/98 once it is connected correctly to your existing
Enhanced IDE connector on your motherboard.
In Windows 95, use the CD-ROM Installation Disk if you wish to use the drive in MS-DOS mode.
To install the Blaster CD software:
1.
Turn on the power to your computer.
2.
When Windows 95/98 boots, choose the
button on the task bar. The Start menu is
displayed.
3.
Choose
Run...
on the Start menu.
The Run dialog is displayed.
4.
Insert the CD-ROM Installation
Disk into a floppy disk drive.
5.
In the Run dialog text box, enter
A:\SETUP
(or
B:\SETUP)
and
choose
OK
. The installation
program prepares the InstallShield
Wizard to guide you through the
application setup.
This manual reflects a software
installation in an unmodified
version of the operating system.