Creative Conners Stagehand Pro 3, Reference Manual

Page: 44 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 38 of 56
2. Press SET 3X (Displays CP---)
3. Scroll to desired program number (ie CP001)
4. Press SET 1X (Displays 0.---)
5. Scroll two clicks right (Displays 2.WR)
6. Press SET 2X (Displays Flashing 2.ALL)
7. The VFD will think for while as it copies all the parameters from the USB drive. When it’s
finished, it will beep. After the Beep reset the drive by engaging the E-Stop or removing the
mains power.
Saving to USB
Pro Tip - Saving a new parameter set to the internal USB storage is an advanced topic that could
overwrite our factory-default parameter sets and cause the Stagehand to stop functioning. You’ve
been warned. Proceed with caution.
If you have a set of parameters for a machine of your own making, or made tweaks to the stock
parameters that you’d like to save, you can save your new parameter set to the USB storage device
inside the Stagehand Pro 3. There are 99 available slots that can be saved. We recommend that you
start with slot CP004 and work your way up rather than overwrite the standard settings. To save your
parameters to a new file on the USB storage:
1. Press MODE 4X (Displays USB-A)
2. Press SET 3X (Displays CP---)
a. To overwrite an existing file skip to step three
b. To save a new file location press SET 1X (Displays 0.---)
c. Scroll one click to the right (Displays 1.RD)
d. Go to step 6
3. Scroll to desired program number. (ie CP004)
4. Press SET 1X (Displays 0.---)
5. Scroll Right one click (Displays (1.RD)
6. Press SET 1X
7. The VFD will think for a while as it copies all the parameters onto the USB drive. When it’s
finished, it will beep. After the Beep reset the drive by engaging the E-Stop or removing the
mains power.