Stagehand Pro 3 Reference Manual, 11-20
Page 18 of 56
Manual Operation
Before you can write complex cues in Spikemark, let’s make sure the machine runs fine with when
jogging it manually using the buttons and knobs on the face of the Stagehand.
●
Release the Emergency Stop button on your Showstopper
●
Press the Forward Button.
●
While holding the Forward Button turn the Knob Clockwise slowly. The brakes should release
and the machine should begin to move. The Position Encoder counts are displayed on the
Status Display. The counts should be increasing in positive value, if not the motor and
encoder are out of phase and you’ll need to rewire either the motor or encoder. See the
troubleshooting section for more details.
●
Gradually rotate the Knob counterclockwise until the machine stops.
●
Release the Forward Button.
Summary of Contents for Stagehand Pro 3
