Creative Conners Stagehand Pro 3, Reference Manual

Page: 47 / 63

Stagehand Pro 3 Reference Manual, 11-20
Page 41 of 56
there's a fault
191 SU terminal function selection
general output (used by PLC to
indicate a brake relay failure)
9999 9999 9999
192 IPF terminal function selection
general output (used by PLC for
motor brake)
9999 9999 9999
193 OL terminal function selection
general output (used by PLC for load
brake)
9999 9999 9999
194 FU terminal function selection General output 9999 9999 9999
252 Override bias
Percentage of analog signal to use
for speed signal ***adjust this to
overspeed motor
100 100 100
285
Overspeed detection frequency
(speed deviation excess detection
frequency) Hz difference between commanded
speed and actual that will trip an
overspeed fault
20 20 20
331
RS-485 communication station
number
RS-485 Communication 1 1 1
332 RS-485 communication speed RS-485 Communication 48 48 48
333
RS-485 communication stop bit
length / data length
RS-485 Communication 0 0 0
334
RS-485 communication parity check
selection
RS-485 Communication 0 0 0
338
Communication operation command
source
RS-485 Communication 0 0 0
339
Communication speed command
source
RS-485 Communication 0 0 0
340
Communication startup mode
selection
RS-485 Communication 0 0 0
359 Encoder rotation direction CCW encoder rotation is forward 1 0 1
368 Feedback gain
Response of the feedback will
become slow when the
acceleration/deceleration time is
long. In such case, increase the
setting value
1 1 1
369 Number of encoder pulses
PPR for Vector Control (Floorpocket
pre Jan '19 = 2500) All other
machines = 1024
1024 1024 1024