58
eng
Li
Sh
59
eng
Li
Sh
RohS DECLARATioN /// DECLARATioN oF CoNFoRMiTY
UL STATEMENT /// FCC STATEMENT
uL STATEMENT
ETL LiSTED 3074926
CoNFoRMS To ANSi/UL 60950-1-2002; Ed.:1
CERTiFiED To CAN/CSA-C22.2 No. 60950-1
fCC STATEMENT
Radio and Television interference Statement
This device complies with Part 15 of the FCC Rules. operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may cause undesired operation.
NoTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communica-
tions. however, there is no guarantee that interference will not occur in a particular instal-
lation. if this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet, prepared by the federal Communications Com-
mission, helpful: how to identify and Resolve Radio and TV interference Problems. This
booklet is available from the U.S. Government Printing office, Washington, DC 20402.
Warning!
This equipment has been certified to comply with the limits for a Class B digital device
under Part 15 of FCC Rules. This peripheral may only be attached to a computer certified to
comply with the Class B limits. operation with a non-certified computer is likely to result
in interference to radio and TV reception. Any changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this
equipment.
RohS DECLARATioN
Based on information provided by our suppliers C Technologies AB designated as RohS
compliant.
The maximum concentration value of the prohibited six substances of “RohS directive” do
not exceed the following:
1 Cadmium and its compounds: 0.01% (100 ppm) by weight in homogeneous materials.
2. Lead and its compounds, mercury and its compounds, hexavalent chromium and its
compounds, polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE):
0.1% (1000 ppm) by weight in homogeneous materials.
– homogeneous material means a unit that cannot be mechanically divided into single materials.
– The term “homogeneous” is understood as “of uniform composition throughout”. Ex-
amples of “homogeneous materials” are individual types of plastics, glass, metals, alloys,
paper, board, resins, and coatings.
DECLARATioN oF CoNFoRMiTY
CREALoGiX E-Payment AG
Bösch 83b
6331 hünenberg
SWiTZERLAND
hereby declares the product
PayPen (product No. CT 151035 and CT 151036)
to comply with the EMC directive 89/336/EEC, fulfilling the requirements of the standards
EN 55022:1998 A1+A2
EN 55024:1998 A1+A2
EN 61000-3-2:95 A1-A2+A14
EN 61000-3-3:1995 A1
EC directive 2002/95/EC (the RohS Directive)
hünenberg 2010
Stefanie kälin-Lederer & Sabin Frank
Productmanagement & Sales
CREALoGiX E-Payment AG