Creality Ender 3 Pro Assembly Instructions V1.0
14
www.rb42.blog
Step 3 - Z axis limit switch
Tools for this
step
M3 Hex Key (Allen Key)
Parts for this
step
1x (09) Z axis limit switch assembly
Process
3.1
(09) Z axis limit switch assembly is installed on the left-hand
side of the frame, at the perpendicular junction where the
vertical (15) Z-axis vertical profile (left) and the horizontal
(02) printer base meet.
3.2
Insert the T-slot nuts of the (09) Z axis limit switch assembly
into the channel on the side of the Z-axis vertical profile by
rotating the nuts so that they are in the same orientation as
the channel on the profile so that they are placed into the
channel without obstruction.
3.3
Position the (09) Z axis limit switch assembly so that the
positioning tab is resting on top of (02) printer base
horizontal profile.
Summary of Contents for Ender 3 Pro
Page 1: ...Version 1 0...
