Creality Ender 3 Pro Assembly Instructions V1.0
54
www.rb42.blog
Step 19 - Load SD card and print G-code
Process
19.1
Once the Bed has been levelled correctly (step 17) and the
material loaded and hot-end primed (step 16), insert the
microSD card with G-code loaded into the microSD card slot,
located on the printer base at the front next to the USB port.
The bottom line of text on the printer display will change
from being ‘Card Removed’ and instead read ‘Card Inserted’.
If this change does not happen and the display in not
showing ‘Card Inserted’ then there may be an issue with the
SD card you are using.
19.2
After the SD card has been initiated and is recognised by the
printer, select the G-code file loaded on the SD card to be
printed.
Main>Print from TF card> [select G-code file to be
printed]
*Some versions of the firmware installed on the Ender 3 will
read ‘SD card’, whereas others (such as the Ender used in
this manual) use ‘TF card’.
Summary of Contents for Ender 3 Pro
Page 1: ...Version 1 0...
