Creality Ender 3 Pro Assembly Instructions V1.0
33
www.rb42.blog
12.6
Firmly push the loose end of the Bowden tube into the coupler
fitting on the (05) Hot-end carriage (from step 7). Confirm
both
ends of the Bowden tube are securely in place by applying some
force on the tube and attempting to pull out from the fitting,
they should not be able to be removed from the fittings if
correctly inserted.
12.7
Tidy up the wiring and Bowden tube using the supplied cable ties
where necessary to hold wiring in place.
Step 13 - Powering up
Parts for this
step
(13) IEC mains power cable
Process
13.1
With the supplied (13) mains power cable, plug the printer in
at the mains and turn on at both the mains outlet and then
on the (03) power supply of the printer. Once powered on the
LCD display will turn on and display the loading/boot-up
screen followed by the information home screen.
Summary of Contents for Ender 3 Pro
Page 1: ...Version 1 0...
