Frozen Gourmet Setup and Operators’ Guide
4550001
13
f.
Do one of the following:
• If your group has an ODD number of spirals (3, 5, etc.) remove the harnesses
from all motors in the group except the leftmost one. To the rightmost motor,
utilizing the 1599024 jumper, connect the harness from the motor immedi-
ately to its left.
• If your group has an EVEN number of spirals (4, 6, etc.) remove the har-
nesses from all motors inside the group (leave the harnesses connected to the
leftmost and rightmost motors).
g.
Install a spiral at the rightmost position in your group. Make sure it has the
same product capacity and is opposite to the one in the leftmost position.
h.
Return the tray to the merchandiser.
i.
Electronically couple the motors as needed (see your Programming Guide for
information).
Couple the left motor to the right motor inside the frost cover over the tray motor. See the
Programming Guide.
Load products as shown.
