ASSEMBLY & USE
ALWAYS use fresh cool water when operating the humidifier.
1.
Turn Water Tank upside down, unscrew Water Tank Cap and fill with cool water only.
ALWAYS HOLD WATER TANK WITH TWO HANDS WHEN FULL.
DO NOT
fill water all the way to the rim.
DO NOT
use hot water.
DO NOT
add any medication, essential oils, or salt to the water tank. (Essential oils
should only be used in the aroma pad.)
DO NOT
pour water into Mist Outlet Channel.
2.
Screw Water Tank Cap back onto Water Tank and turn the tank over to place on
Humidifier Base, making sure it fits together securely. Please note if the water tank is
not properly placed on the humidifier base it will not turn on.
Note: Do not attempt to move the humidifier while Water Tank is placed on the
Humidifier Base. Doing so may cause leakage of water and/or Humidifier Base to
overfill.
3.
Power:
Plug the power cord in and press this icon to turn power on and off. When
power is on, cool mist will begin to rise from the mist lid at the highest mist level
setting.
Note:
When the power is on the icon will be blue
4.
Warm Mist Option:
Press this icon to select the warm mist function.
It may take 5-10
minutes for the water to warm up
)
Note:
A blue light will be on when the Warm Mist is on
5.
UV Mode:
Press this icon to turn on UV, then press again to turn off UV.
Note:
A blue light will be on when UV light is on.
6.
Sleep Mode:
Press the UV icon for 3 seconds to turn the display icons off. Press any
button to de-activate the Sleep Mode setting.
7.
Mist Setting:
Press this icon to change the mist output from low or high. The
humidifier always starts at high when powering on, to change to low press once.
Note:
The high setting will light up blue and the low setting will light up purple.
SET THE CORRECT HUMIDITY OUTPUT
: To reduce excessive humidity or condensation
especially in small rooms, leave the room door open and adjust mist intensity to
low with the Mist Setting Icon.
NOTE:
As a safety feature, when the humidifier runs out of water it will beep three times
and
p
ower off. Unplug the unit before removing and refilling the water tank.
AROMA TRAY
To use the Aroma function, add essential oils to the included pad (or with any
compatible scent pad) as desired. Replace pad before running humidifier. Remove
scent pad and clean out tray when not using the aroma tray.
6
Summary of Contents for EE-6908
Page 13: ...11 ...
