22
SUSPENDED PUMP SYSTEMS
NOTE: This installation MUST meet Class I, Division 1 requirements of the National Electric Code.
Remove two capscrews (a) and lockwashers (b) and remove lifting handle (c) (See Figure 13). Replace lifting handle (c)
with Suspended Bracket (61) on motor housing and insert two capscrews (a) and two lockwashers (b) and tighten.
Attach the pump cover to the top of the bracket. Then connect the discharge pipe (by others) to the pump. Mount
the
fl
oat switches to the discharge pipe and pull the pump cord sets and the
fl
oat switch cords through the cord grips
attached to the pump cover. The pump with cover can now be lowered into basin.
PARTS LIST
ITEM QTY. PART
No. DESCRIPTION
61
1
071753
Suspended Bracket Basin Depth 36”
071754
Basin Depth 48”
071755
Basin Depth 60”
071756
Basin Depth 72”
071757
Basin Depth 84”
61
c
a
b
FIGURE 12
Summary of Contents for Barnes XSGV 2 HP
Page 15: ...15 FIGURE 8 2HP XSGV SERIES ...
Page 16: ...16 FIGURE 9 2HP XSGV SERIES ...
Page 18: ...18 FIGURE 10 3 5 7 5HP XSGV SERIES ...
