Craftsman CMXEVBE176120, Instruction Manual

Page: 7 / 48

7
Wheel (2)
Axle
Tool
Caddy
Hub
Wheels Assembly (Fig. E):
3. Position the Axle side of one of the Wheels into the
Drum, as shown. Push Wheel into the Tool Caddy
Hub. You will hear the Wheel snap into the Tool
Caddy. Repeat for the Second Wheel.
Fig. E
Powerhead Assembly (Fig. F)
1. Line up the Front (label and switch side) of the
Powerhead with the Vac Inlet Port located on the Front
of the Drum.
NOTE:
Powerhead must be aligned with Drum for proper
attachment.
2. Place Powerhead on Top of Drum.
3. Be sure Powerhead completely covers the top of the
Drum so leakage does not occur.
4. Push down the Latches, and the Powerhead will attach
to the Drum.
5. To remove the Powerhead, pull up on the Latches and
remove from the Drum.
Fig. F
On/Off
Switch
Handle
Power
Cord
Powerhead
Latch (2)
Drum Top