Craftsman CMXEVBE176120, Instruction Manual

Page: 8 / 48

8
Insert Hose (Fig. G)
Insert the Hose Locking End of the Hose into the Vac Inlet
Port of the Vac. The Hose should snap into place.
To remove the Hose from the Vac, press the Release Button
in the Hose Assembly and pull the Hose out of the Vac Inlet
Port, as shown.
Vac Inlet
Port
Locking End
of Hose
Release
Button
Fig. G
Hose Storage (Fig. I):
The Hose Assembly may be stored by wrapping it around
the unit and snapping it into the Recessed Sides.
Accessory Storage
Accessory Tools Storage (Fig. H):
Your Wet/Dry Vac Accessories can be stored in the Tool
Caddy mounted on the Drum.
Fig. H
Extension Wands Storage (Fig. J):
The Extension Wands can be stored underneath the Vac by
sliding the Tapered End first through the allotted Holes on
the back of the Caddy. The Wand stop on the front of the
Vac will hold the Extension Wands in place.
Hose
Assembly
Hose Storage Area
Fig. I
Extension
Wands (2)
Extension Wand
Storage Holes (2)
Fig. J
Accessory
Storage
Tool Caddy
CAUTION:
Do not operate vacuum while the hose is still wrapped
around the powerhead assembly in the storage
position.
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings blocked;
keep free of dust, lint, hair or anything that may reduce
air flow.
!
!