7
UNPACKING
The machine is properly packaged and
shipped in a carton for safe transportation.
When unpacking, carefully inspect the
carton and ensure that it has not been
damaged during transit. Open the carton
and check that the machine and the parts
are in good condition.
DESCRIPTION QTY
Sander..........................................
1 pc
12"
Sanding
Disc.......................... 1 pc
Miter
Gauge ................................. 1 pc
User
Manual ................................. 1 pc
NOTE:
While doing inventory, if you can
not find any part, check if the part has
already been installed on the machine.
Some parts come pre-assembled for
shipping purposes.
WORKBENCH LOAD
CX506 sander is not very heavy. If using a
workbench, make sure to place the sander
on a workbench that has the capacity to
support the weight of the CX506 sander.
CLEAN UP
The unpainted surfaces of the machine are
coated with a rust preventive waxy oil to
prevent corrosion during shipment and
storage. You will need to clean up this oil
before operating the machine.
Put some cleaner or degreaser on the
unpainted areas where rust preventive oil is
and leave it for 5 minutes.
Use a rag and wipe off the oil. If the oil does
not wipe off, repeat the above steps 2 to 3
times. Once the unpainted surfaces are
clean, use metal protectant to prevent from
rust.
