13
MAINTENANCE
During the life of your machine, you will
need to practice some regular maintenance
to keep your sander in peak performance
condition.
CHECK THE SANDER DAILY FOR:
Loose mounting bolts
Worn or damaged power cord
Loose or damaged sanding disc
Any other unsafe condition
CLEANING
Wipe off the sawdust built up from the table
surface and vacuum the dust from the
motor fan area.
The moisture from the wood dust remaining
on the table surface can cause rust. The
table and other un-painted surfaces of the
machine should be cleaned and wiped after
every use to make sure that there is no
moisture against bare metal surfaces. Then
seal with an aerosol or paste wax.
WARNING!
Make sure the machine is turned OFF
and the cord is disconnected from the
power source before servicing and
removing/replacing any components on
the machine.
