Connection to the mains supply
WARNING: THIS APPLIANCE MUST BE EARTHED.
Mains Plug
This product is fitted with a standard UK mains outlet 3 pin plug complying with BS1363 and is designed to operate from a mains supply of
AC230V - 50HZ
Ÿ
Should the fuse in the 13 amp plug require changing a 13 amp BS1362 fuse must be fitted.
Ÿ
Always replace the fuse with one of the same rating.
Ÿ
Check that the voltage marked on the product corresponds with your supply voltage.
Ÿ
If the plug is unsuitable for your mains socket or needs to be replaced, please note the following:
Ÿ
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in your home/office or the cable is
too short to reach a power point, then obtain a proper safety approved extension lead /adaptor or consult with Craft Dragon Limited.
Ÿ
Important: The wires in the mains lead must be connected as per the following diagram
Always ensure that the plug cord grip is fastened correctly
Mains lead
•
The mains lead should reach from the socket to the base unit without straining the connections.
•
Do not let the mains lead hang over the edge of a worktop where a child or pet could reach it.
•
Do not let the lead run across an open space e.g. between a low socket and table.
•
Do not let the lead run across a cooker or toaster or other hot area which might damage the cable.
Ÿ
If the mains lead of this appliance is damaged do not use it. The lead may only be replaced by Craft Dragon Ltd or an agent of the company.
Ÿ
With the thermostat control switch and power setting switches in the “OFF” Position; plug the CraftDragon® ImPress into the main power supply.
Note:
Ÿ
The plug removed from the mains lead, if severed, must be destroyed, as a plug with bared flexible cord is hazardous if engaged into a live
socket outlet.
© CraftDragon
®
14
Live
(Brown)
Earth
(Green/Yellow)
Neutral
(Blue)
DANGER
Electric
