manualshive.com logo in svg

Cradlepoint MBR1400LE-VZ, Product Manual

The Cradlepoint MBR1400LE-VZ is a powerful networking device designed for high-speed connectivity. To make the most of its features, download the comprehensive Product Manual for free from manualshive.com. This manual provides essential instructions and troubleshooting tips, ensuring seamless usage of this cutting-edge device.

Share
Download
background image

CRADLEPOINT 

MBR1400 | USER MANUAL – Firmware version 4.4

 

© 2013 

CRADLEPOINT, INC.                                        PLEASE VISIT 

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

 FOR MORE HELP AND RESOURCES 

 

 

 

 PAGE 212  

 

8.5.1

 

Simple Mode Settings 

Display: 

This section allows you to choose if a 

"Terms of Use" page will be given to the user 
connecting to the hotspot.  

 

Internal Terms of Use.

 Fill in your own 

terms of use. 

 

External Terms of Use.

 Specify a URL 

that has the Terms of Use page. Users 
will automatically be directed to this page. 

 

No Terms of Use. Redirect Only. 

Redirection on Successful Authentication:

 

Depending on your choice for the “Terms of Use” 
page, your have further options for where the 
user will be directed. After the user accepts the 
terms, you can either let him/her continue to the 
URL they were trying to reach or you can force 
the user to go to a specified URL once before 
continuing on. 

 

To the URL the user intended to visit. 

 

To an administrator-defined URL.  

Redirect URL:

 If you have chosen to send users 

to an administrator-defined URL, you will need to 
specify the address.

 

Session Timeout:

 (Default: 60 minutes.) The amount of time the user may use the router before being forced to 

authenticate again.  

Idle Timeout:

 (Default: 15 minutes.) If the user is idle for this amount of time, make them re-authenticate. 

Bandwidth (upload): 

(Default: 512 Kbits/sec.) The data rate limit for users uploading data through the hotspot. 

Bandwidth (download): 

(Default: 1024 Kbits/sec.) The data rate limit for users downloading data through the hotspot. 

 

Summary of Contents for MBR1400LE-VZ




















































































































































































































































Reviews:

No comments

Related manuals for MBR1400LE-VZ

Konica Minolta Network Setup Network Setup Manual preview
Network Setup
Brand: Konica Minolta Pages: 38
Western Digital My Net N750 Start Here Manual preview
My Net N750
Brand: Western Digital Pages: 8
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Brand: Riverbed Pages: 38
Tripp Lite N201-005-BL Specification Sheet preview
N201-005-BL
Brand: Tripp Lite Pages: 3
Supermicro AOC-MGP-i2 User Manual preview
AOC-MGP-i2
Brand: Supermicro Pages: 27
Ozenda AR4505GW Instruction Manual preview
AR4505GW
Brand: Ozenda Pages: 116
ANTAIRA LMP-1202M-SFP Series Quick Installation Manual preview
LMP-1202M-SFP Series
Brand: ANTAIRA Pages: 2
ACTi LPR-100 Quick Installation Manual preview
LPR-100
Brand: ACTi Pages: 14
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
Comet Labs 24-Port 1000BASE-T User Manual preview
24-Port 1000BASE-T
Brand: Comet Labs Pages: 44
DELTA GROUP LOYTEC LIP‑3ECTC Installation Instructions preview
LOYTEC LIP‑3ECTC
Brand: DELTA GROUP Pages: 4
Hama 53178 Instruction Manual preview
53178
Brand: Hama Pages: 45
ADTRAN NetVanta 1224R Specifications preview
NetVanta 1224R
Brand: ADTRAN Pages: 4
Hirschmann 943 221-001 Description And Operating Instructions preview
943 221-001
Brand: Hirschmann Pages: 8
Tripp Lite N302-05M Specification Sheet preview
N302-05M
Brand: Tripp Lite Pages: 2
Nedap Luxon Bridge Installation Manual preview
Luxon Bridge
Brand: Nedap Pages: 3
B&B Electronics Elinx EIR408-T Manual preview
Elinx EIR408-T
Brand: B&B Electronics Pages: 19
Arista CloudVision DCA-CV-100 Quick Start Manual preview
CloudVision DCA-CV-100
Brand: Arista Pages: 46

Brands by name

Popular brands

Load more brands